What does this miracle oil NOT do? Can be used over any porous paint to seal and protect, provided the substrate (surface) painted is porous as well. YOU CAN NOT MESS THIS UP!!! Non- toxic, will not go spoil or go rancid, achieve an absolutely beautiful finish with little effort. Just try it- you’ll be hooked! I use hemp oil on almost everything!! No learning curve here- apply it, wipe it and go.
This solvent-free oil finish provides a protective, water-resistant surface. Use on new wood that is bare, stained Milk-painted or to revive old wood finishes. It penetrates to protect from the inside out. Does not leave a surface film that will chip or scratch. This food-safe oil finish is perfect for use in the kitchen on wood or stone. Used outside, it can restore the luster of old oil based paint or revitalize surfaces such as cast iron. Test on an inconspicuous spot prior to using on an entire piece.
How to use this product: Surface must be clean and dry. Apply small amount of oil to surface using a clean cloth. Rub gently until it is absorbed into raw wood or Milk Paint finish. For additional sheen and protection, add 2-4 coats. With no solvents, drying time is extended, so allow 2 hours between coats and wipe away excess after 12 hours. Finished piece may take several days to cure. To maintain, apply a light coat every other year as needed. To remove scratches, lightly sand blemish, then reapply oil.
Covers approximately 25-40 sq. feet. Soap and water cleanup.
Seriously- try it. You will be hooked- I put this stuff on everything- my car interior, old metal, leather shoes& boots, counters….